Accessories

Access the Old Accessories Page

• 

  Step Down Transformer 347V-120V

  Primary voltage 347V, 60Hz
  Full load secondary output 115V, 60VA
  Class A (105°C) maximum temperature case
• 

  PA3 Ardito Round 3.5in Mounting Plate

  Ideal for unfinished basements and other renovation projects. Adjustable mounting bars included. To install with the Ardito 3.5 in remodel housing and round trims.
• 

  PA2 Ardito Square 2.5in Mounting Plate

  Ideal for unfinished basements and other renovation projects. Adjustable mounting bars included. To install with the Ardito 2.5 in remodel housing and square trims.
• 

  PA3 Ardito Square 3.5in Mounting Plate

  Ideal for unfinished basements and other renovation projects. Adjustable mounting bars included. To install with the Ardito 3.5 in remodel housing and square trims.
• 

  PA2 Ardito Round 2.5in Mounting Plate

  Ideal for unfinished basements and other renovation projects. Adjustable mounting bars included. To install with the Ardito 2.5 in remodel housing and round trims.
• 

  PA4 Ardito Round 4in Mounting Plate

  Ideal for unfinished basements and other renovation projects. Adjustable mounting bars included. To install with the Ardito 4 in remodel housing and round trims.
• 

  PA4 Ardito Square 4in Mounting Plate

  Ideal for unfinished basements and other renovation projects. Adjustable mounting bars included. To install with the Ardito 4 in remodel housing and square trims.
• 

  Reusable Steel Template

  Available only for square trims including Ardito and Profilux.
• 

  Ardito Short Captive Hook

  Captive hook (included with the Ardito round and square trim supports) that holds the trim firmly against the ceiling.
• 

  Trim Removal Suction Cup

  Suction cup that helps pulling on the trim's lens to remove the trim from the ceiling. Compatible with all Ardito products and other Contraste products with lenses.
• 

  50mm Clear Lens

  50mm high-quality replacement clear lens available with some of the Ardito, Urbaï , Intermezzo and Concerto products.
• 

  57mm Clear Lens

  57mm high-quality replacement clear lens available with some of the Ardito products.
• 

  50mm Frosted Lens

  50mm high-quality replacement frosted lens available with some of the Ardito, Urbaï , Intermezzo and Concerto products.
• 

  57mm Frosted Lens

  57mm high-quality replacement frosted lens available with some of the Ardito products.
• 

  57mm Frosted Ardito Wall Wash Lens

  57mm high-quality replacement frosted lens available the Ardito wall wash products.
• 

  49mm Linear Lens

  49mm high-quality replacement linear lens available with some of the Ardito, Urbaï, Concerto, and Classic products.
• 

  57mm Linear Lens

  57mm high-quality replacement linear lens available the Ardito 3.5in and 4 in products.
• 

  49mm Solite Lens

  49mm high-quality replacement solite lens available with some of the Ardito, Urbaï, Concerto, and Classic products.
• 

  57mm Solite Lens

  57mm high-quality replacement solite lens available the Ardito 3.5in and 4 in products.
• 

  49mm Prismatic Lens

  49mm high-quality replacement prismatic lens available with some of the Ardito, Urbaï, Concerto, and Classic products.
• 

  49mm Honeycombs Lens

  49mm high-quality replacement honeycombs lens available with some of the Ardito, Urbaï, Concerto, and Classic products.
• 

  57mm Honeycombs Lens

  57mm high-quality replacement honeycombs lens available the Ardito 3.5in and 4 in products.
• 

  P2550N-3600N Mounting Plate

  Mounting plate for Non-IC housings; no mounting bars available. To be installed directly under the joist. 3-3/4 in (95 mm) diameter hole.
• 

  P2550-3600 Mounting Plate

  Mounting plate for Non-IC housings; mounting bars required (order separately). 3-3/4 in (95 mm) diameter hole.
• 

  P2550L Mounting Plate

  Mounting plate for Non-IC housings; mounting bars required (order separately). 3-3/4 in (95 mm) diameter hole.
• 

  Short Mounting Bars

  Set of two adjustable mounting bars. Extend from 13-1/2in to 21-3/4 in (343 mm to 553 mm).
• 

  Profilux 6 feet cable

  Profilux 6 feet cable
• 

  Profilux 20 feet cable

  Profilux 20 feet cable
• 

  P2000 Mounting Plate

  Mounting plate for remodel type housing. 7 1/4" X 6 1/2"
• 

  P2000L Mounting Plate

  Long mounting plate for remodel type housing. 17 1/4" X 6"
• 

  Long Mounting Bars

  Set of two adjustable mounting bars. Extend from 19-1/2in to 34 in (495 mm to 863 mm)
• 

  Interlocking Mounting Bars

  Adjustable interlocking new construction mounting bars. Extend from 10 in to 24-1/2 in (254 mm to 662 mm)
• 

  P2550NW New Construction Mounting Plate

  New construction mounting plate. 3-3/4 in (95 mm) diameter hole. Mounting bars extend from 10 in to 24-1/2 in (254 mm to 662 mm).
• 

  P2000NW New Construction Mounting Plate

  New construction mounting plate. 4-5/16 in (109 mm) diameter hole. Mounting bars extend from 10 in to 24-1/2 in (254 mm to 662 mm).
• 

  P2000N Mounting Plate

  Long mounting plate for remodel type housing. 13-1/4 in x 6-1/2 in. 4-5/16 (109 mm) diameter hole.
• 

  Vapour Barrier

  Thermoplastic Humidity protector approved for use with Contraste IC Air Tight housings. Meets UL 1598 vapour barrier requirements. Rated for 194°F (90°C). Fits with all Contraste products, with or without a can.
• 

  Mega Vapour Barrier

  Mega Thermoplastic Humidity protector approved for use with Contraste IC Air Tight housings. Meets UL 1598 vapour barrier requirements. Rated for 194°F (90°C). Fits with all Contraste products, with or without a can.
• 

  Mini Vapour Barrier

  Mini thermoplastic humidity protector approved for use with Contraste IC Air Tight housings. Meets UL 1598 vapour barrier requirements. Rated for 194°F (90°C). Fits with all Contraste Remodel products, with or without a can.
• 

  Flood Replacement Optic Reflector

  Replacement optic reflectors for on-site beam angle modification. Produces a 48° flood beam. Compatible with certain products of the Concerto line.
• 

  Flood Replacement Reflector

  Replacement optic reflectors for on-site beam angle modification. Produces a 48° flood beam. Compatible with certain products of the Concerto line.
• 

  P3RN Mounting Plate

  Mounting plate without Mounting Bars. 3-11/16 in (94 mm) diameter hole.
• 

  P3RNW Mounting Plate

  Mounting Plate with Mounting Bars. 3-3/4 in (96 mm) diameter hole. Mounting bars extend from 10 in to 24-1/2 in (254 mm to 662 mm).
• 

  P4RN Mounting Plate

  Mounting Plate without Mounting Bars. 4-1/4 in (108 mm) diameter hole.
• 

  P4RNW Mounting Plate

  Mounting Plate with Mounting Bars. 4-5/16 in (109 mm) diameter hole. Mounting bars extend from 10 in to 24-1/2 in (254 mm to 662 mm).
• 

  P4SN Mounting Plate

  Mounting Plate without Mounting Bars. 4-3/16 in (107 mm) x 4-3/16 in (107 mm) hole.
• 

  P4SNW Mounting Plate

  Mounting Plate with Mounting Bars. 4-5/16 in (109 mm) x 4-5/16 in (109 mm) hole. Mounting bars extend from 10 in to 24-1/2 in (254 mm to 662 mm).
• 

  P6RN Mounting Plate

  Mounting Plate without Mounting Bars. 6-3/8 in (162 mm) diameter hole.
• 

  RR3 3.5in Round Goof Ring

  3.5in round goof ring available with the Urbaï products.
• 

  P6RNW Mounting Plate

  Mounting Plate with Mounting Bars. 6-3/4 in (171 mm) diameter hole. Mounting bars extend from 10 in to 24-1/2 in (254 mm to 662 mm).
• 

  P4000N Mounting Plate

  Mounting Plate with a 3-5/16 in (84 mm) diameter hole.
• 

  P5000 Mounting Plate

  Mounting Plate with a 2-9/16 in (65 mm) diameter hole.
• 

  P5000N Mounting Plate

  Mounting Plate with a 2-9/16 in (65 mm) diameter hole.
• 

  P4000L Mounting Plate

  Mounting Plate with a 3-5/16 in (84 mm) diameter hole.
• 

  P4000NW Mounting Plate

  Mounting Plate with Mounting Bars. 3-5/16 in (84 mm) diameter hole. Mounting bars extend from 10 in to 24-1/2 in (254 mm to 662 mm).
• 

  P5000L Mounting Plate

  Mounting Plate with a 2-9/16 in (65 mm) diameter hole.
• 

  P7000NW Mounting Plate

  Mounting Plate with Mounting Bars. 4-1/4 in (108 mm) diameter hole. Mounting bars extend from 10 in to 24-1/2 in (254 mm to 662 mm).
• 

  RS3 3.5in Square Goof Ring

  3.5in square goof ring available with the Urbaï products.
• 

  RS4 4in Square Goof Ring

  4in square goof ring available with the Urbaï and Profilux products.
• 

  RR4 4in Round Goof Ring

  4in round goof ring available with the Urbaï and Profilux products.
• 

  RON2000 4in Round Goof Ring

  4in round goof ring available with the Concerto products.
• 

  RON3000 3.5in Round Goof Ring

  3.5in round goof ring available with the Concerto products.
• 

  RON2100 4in Square Goof Ring

  4in square goof ring available with the Concerto products.
• 

  RON3100 3.5in Square Goof Ring

  3.5in square goof ring available with the Concerto products.
• 

  RR6 6in Round Goof Ring

  6in round goof ring available with the Profilux products.
• 

  3.5 in Opening Adaptor

  Opening Adaptor for round trims of 3-1/2in Series. Can lip adaptor for 3-1/2in (89 mm) pot in a 4-1/4in (108 mm) opening.
• 

  BAFRE2550 Baffle

  Baffle for 2550 housing series.
• 

  BAFRE2575 Baffle

  Baffle for 2575 housing series.
• 

  REFRE2550 Reflector

  Reflector for 2550 housing series.
• 

  REFRE2575 Reflector

  Reflector for 2575 housing series.
• 

  47mm Clear Lens

  47mm high-quality replacement clear lens available with Concerto products.
• 

  47mm Frosted Lens

  47mm high-quality replacement frosted lens available with Concerto products.
• 

  47mm Linear Lens

  47mm high-quality replacement linear lens available with Concerto products.
• 

  47mm Prismatic Lens

  47mm high-quality replacement prismatic lens available with Concerto products.
• 

  Modul-Aim Suspension Kit
• 

  Modul-Aim Remodeler Installation Kit

  Kit including 2 lateral supports, 4 universal hooks and the necessary screws. Used for a set of configurable modular base units (MOD1). To know the number of kits needed, use our web configurator or contact our customer service.
• 

  Modul-Aim New Construction Installation Kit

  Kit consisting of 2 sets of adjustable suspension bars, 6 side supports and the necessary screws. Used as needed with a set of configurable modular base units (MOD1). To know the number of kits needed, use our web configurator or contact our customer service.
• 

  Modul-Aim Additional Installation Support Bracket

  Use additional support bracket in a pre assembled renovator. Necessary screws included.
• 

  Modul-Aim Mask

  Magnetic trim gives a flush effect to the projector and serves to hide the mounting screws.
• 

  Modul-Aim Trim

  Modul-Aim trim is available in 3 different colors for each of the available configurations.
• 

  Modul-Aim Trimless

  Create a seamless and minimalist flush finish with the trimless finish option offered by the Modul-Aim mesh.
• 

  Ardito 2.5in Round Mud-in-Plate

  This mud-in-plate is compatible with some of the Ardito 2.5 in flangeless (TR) models. Create the perfect seamless, minimalist flush finish with the trendy flange-free option this mud-in-plate offers. The mud-in-plates are delivered quickly with the ordered housings to help with faster installation once the trims arrive.
• 

  Ardito 2.5in Square Mud-in-Plate

  This mud-in-plate is compatible with some of the Ardito 2.5 in flangeless (TR) models. Create the perfect seamless, minimalist flush finish with the trendy flange-free option this mud-in-plate offers. The mud-in-plates are delivered quickly with the ordered housings to help with faster installation once the trims arrive.
• 

  Ardito 3.5in Round Mud-in-Plate

  This mud-in-plate is compatible with some of the Ardito 3.5 in flangeless (TR) models. Create the perfect seamless, minimalist flush finish with the trendy flange-free option this mud-in-plate offers. The mud-in-plates are delivered quickly with the ordered housings to help with faster installation once the trims arrive.
• 

  Ardito 3.5in Square Mud-in-Plate

  This mud-in-plate is compatible with some of the Ardito 3.5 in flangeless (TR) models. Create the perfect seamless, minimalist flush finish with the trendy flange-free option this mud-in-plate offers. The mud-in-plates are delivered quickly with the ordered housings to help with faster installation once the trims arrive.
• 

  Ardito 4in Round Mud-in-Plate

  This mud-in-plate is compatible with some of the Ardito 4 in flangeless (TR) models. Create the perfect seamless, minimalist flush finish with the trendy flange-free option this mud-in-plate offers. The mud-in-plates are delivered quickly with the ordered housings to help with faster installation once the trims arrive.
• 

  Ardito 4in Square Mud-in-Plate

  This mud-in-plate is compatible with some of the Ardito 4 in flangeless (TR) models. Create the perfect seamless, minimalist flush finish with the trendy flange-free option this mud-in-plate offers. The mud-in-plates are delivered quickly with the ordered housings to help with faster installation once the trims arrive.
• 

  73mm Frosted Clear Center Lens

  73 mm high-quality replacement frosted clear center lens.
• 

  73mm Frosted Lens

  73mm high-quality replacement frosted lens.
• 

  73mm Clear Lens

  73mm high-quality replacement clear lens.
• 

  Ardito 2.5in Spot Replacement Reflector

  Replacement beam reflectors for on-site modification of light distribution. Produces a 15° spot beam.
• 

  Ardito 2.5in Narrow Flood Replacement Reflector

  Replacement beam reflector for on-site modification of light distribution. Produces a 24° narrow flood beam.
• 

  Ardito 2.5in Flood Replacement Reflector

  Replacement beam reflector for on-site modification of light distribution. Produces a 36° flood beam.
• 

  Ardito 2.5in Wide Flood Replacement Reflector

  Replacement beam reflector for on-site modification of light distribution. Produces a 60° wide flood beam.
• 

  Ardito 3.5in and 4in Spot Replacement Reflector

  Replacement beam reflectors for on-site modification of light distribution. Produces a 15° spot beam.
• 

  Ardito 3.5in and 4in Narrow Flood Replacement Reflector

  Replacement beam reflectors for on-site modification of light distribution. Produces a 32° narrow flood beam.
• 

  Ardito 3.5in and 4in Flood Replacement Reflector

  Replacement beam reflectors for on-site modification of light distribution. Produces a 40° flood beam.
• 

  C2550 Collar

  3-1/2" collar for use with the CA2550U Housing
• 

  P2575-2675 Mounting Plate

  Mounting plate for Non-IC housings; mounting bars required (order separately). 4-5/8 in (118 mm) diameter hole.
• 

  P6RNW-SC Snap Clip Mounting Plate

  Mounting Plate with Mounting Bars and snap clips for easy installation.
• 

  P4RNW-SC Snap Clip Mounting Plate

  Mounting Plate with Mounting Bars and snap clips for easy installation.
• 

  Profilux 6 feet cable (New)

  Profilux 6 feet cable
• 

  Profilux 20 feet cable (New)

  Profilux 20 feet cable
• 

  P2575NW New Construction Mounting Plate

  New construction mounting plate. 4-5/8 in (117 mm) diameter hole. Mounting bars extend from 10 in to 24-1/2 in (254 mm to 662 mm).
• 

  P2250RNW

  MOUNTING PLATE
• 

  RR7 9in Round Goof Ring

  9 inch round goof ring. Used with HexaLED
• 

  83 mm frosted clear center lens

  83 mm high-quality replacement frosted clear center lens.
• 

  49mm Clear Lens

  49mm high-quality replacement clear lens.
• 

  83 mm frosted lens

  83mm high-quality replacement frosted lens.
• 

  83mm Clear Lens

  83mm high-quality replacement clear lens.
• 

  RON2575 4in Round Goof Ring

  4-5/8" round goof ring available with the Concerto products.